Your water heater is one of the used and more appliances in your home, and consumes a large regarding your energy dollars each month. And experts say regular care and maintenance is essential to protecting your investment and saving around the home heating and costs.

Regular flushing of your water heater is considered the single most important step you can take to prolong its service life and even save energy. In a period of time, sediments strengthen in the bottom of your hot water heater. These sediments act as a barrier between the flame and the tank, thereby making your heater burn longer and hotter. This is not just destructive to the tank, but highly inefficient and will significantly raise your heating costs.

In most associated with the country, the standard water heater lasts 3-5 years. Regularly flushing your water heater can double existence of your water heater from 3-5 to 7-10 years. Are investigating costs of replacement running from $700 to over $1200 in some cases, getting the most from your heater is critical in today’s economic condition. In addition, regular flushing makes your water heater run more efficiently and can cut heating costs fifty percent. Depending on the volume of drinking water your home uses, that can mean a savings of $20 to over $50 a nights.

To drain your water heater, on the internet should set the thermostat to pilot (if it is a gas water heater) or turn the circuit breaker off (if it is definitely an electric heater). Failure to do so could result in overheating and severe damage to the water heater. Next, close the water supply valve located in the water inlet line going into your water heater. After backing up connect a hose to the drain valve located towards the end of the heater tank. Open the drain and allow it to move until all from the water has emptied from the heating unit. Then close the drain. Open the water supply valve and refill the central heater. You should also open a hot water faucet somewhere indoors and stand there and watch it run for several minutes until the water flows out perfectly. This will allow air to vent via the heater and the water lines. Finally, you can turn the thermostat to be able to its regular setting (for a gas heater), or turn the circuit breakers back on (for an electric heater).

Besides regularly flushing your water heater, plumbing experts also advise adding a water treatment system to your property to filter or condition the water so may less corrosive to your plumbing system, particularly in areas which have hard wetness. For more ways to care for and protect your home plumbing system, contact a licensed, professional plumbing contractor in location to discuss options and products to fit the bill.

Abacus Plumbing, Air Conditioning & Electrical

The Woodlands, TX

(281) 528-1610

https://goo.gl/maps/Fccz1JjKrjN2

Home Maintenance HVAC, Plumbing Products Reduce Emergencies

You May Also Like